Crary Air Reel, Руководство пользователя, Страница: 10 / 60

PN 12071 R122210 6
SAFETY
1. Always place all combine hydraulic controls in neutral
before disconnecting from combine or working on hy-
draulic system.
2. Make sure that all components in the hydraulic system
are kept in good condition and are clean.
3. Relieve pressure before working on the hydraulic
system.
4. Replace any worn, cut, abraded, flattened or crimped
hoses.
5. Do not attempt any makeshift repairs to the hydraulic
fittings or hoses by using tape, clamps or cements.
The hydraulic system operates under extremely high-
pressure. Such repairs will fail suddenly and create a
hazardous and unsafe condition.
6. Wear proper hand and eye protec-
tion when searching for a high-
pressure hydraulic leak. Use a
piece of wood or cardboard as
a backstop instead of hands to
isolate and identify a leak.
7. If injured by a concentrated high-
pressure stream of hydraulic fluid,
seek medical attention immedi-
ately. Serious infection or toxic
reaction can develop from hydrau-
lic fluid piercing the skin surface.
8. Before applying pressure to the system, make sure all
components are tight and that lines, hoses, and cou-
plings are not damaged.
1. Keep bystanders, especially children, away from drive
shafts.
2. Be extremely careful when working around PTO shafts,
drivelines, or other rotating shafts.
3. Do not remove or modify protective shields or guards.
4. Do not step across a PTO shaft or driveline or use it
as a step.
5. Keep guards and shields in place at all times while
operating.
6. Replace all damaged or missing parts or shields with
the correct original manufacturer’s parts.
7. Grease, clean, and maintain PTO components ac-
cording to original manufacturer’s specifications and
information in this manual.
8. Clothing worn by the operator must be fairly tight.
Never wear loose-fitted jackets, shirts, or pants when
working around the drive shafts. Tie long hair back or
put under a cap.
9. Keep hydraulic hoses, electrical cords, chains, and
other items from contacting the drive shafts.
10. Do not clean, lubricate, or adjust the drive shafts when
the reel is engaged and the combine is running.`
2.5 HYDRAULIC SAFETY
2.6 PTO SAFETY
Think SAFETY! Work SAFELY!