Crary Air Reel, Руководство пользователя, Страница: 15 / 60

PN 12071 R122210
11
Section
ASSEMBLY
4
4.1 UNCRATING
1. Locate the manifold and bats crate.
2. Cut the metal bands and remove the 2” X 4”s and saddle
tops (Figure 1).
Figure 1: Manifold and bats crate
Figure 2: Manifold and bats crate
Figure 3: Manifold and bats crate
Read all instructions to become familiar with the parts and procedure used before starting the actual work. You may
refer to the parts catalog for additional aid in assembling the Air Reel.
1. Assemble in an area with sufficient space to handle
the largest component and access to all sides of
the machine
2. Use only lifts, cranes and tools with sufficient capac-
ity for the load.
3. When necessary, have someone assist you.
4. Do not allow spectators in the working area.
WARNING
1. The sawhorses must be capable of supporting 600
pounds each.
2. The sawhorses must be at least 3 feet high.
3. The sawhorses must be blocked, to keep the mani-
fold from rolling.
WARNING
3. Remove the bat assemblies from the crate and place
to the side.
4. Remove the lag screws from the mounting clamps (as
shown in Figure 2) from all locations.
5. Using an overhead hoist and a nylon strap, sling or
chain, connect to the center of the manifold (Figure 3).
6. Remove from crate, and set down on two steel saw-
horses (or equivalent) two to four inches from the ends
of the manifold.
A. The sawhorses must be capable of supporting
600 pounds each.
B. The sawhorses must be at least 3 feet high.