Maintenance Manual
SP 40
Rev. 005
79
Chapter 4
Service Maintenance
4.8.3 LAN Parameters Setup through parallel interface
The NIC board shipped from the factory has defualt paramaters, therefore before use it it is mandatory to configure the
LAN parameters.
On the partner area folder of our Web Site in the SP40, firmware folder, the following file is available for the updating of
the NIC parameters:
SP40LANCFG.ZIP
Containing the files:
lanpar.bat
Batch file to handle the following two files through the parallel interface.
lanpar.hdr
NIC configuration header command (
do not modify it!)
lanpar.txt
NIC configuration parameters (change for Customer LAN environment setup, see below)
The lanpar.txt file is a pure ASCII text file contains the following lines with the default values as indicated below.
Important rules:
1) Every command line must be in a single line separated by CR+LF.
2) Do not remove the start-of text "
{"
and end-of text "}" characters.
3) The key words (i.e.: IP ADDRESS) must be at the beginning of the line and must terminate with the "="
character.
4) It is not necessary to define all the parameters. Parameters not defined, maintain the old value.
5) Every formal error (key word unknown or values over the specifications) cause the interruption of the command.
Example of LANPAR.TXT
Key Word=parameter
Default Values
Specification
{
HOST NAME=
string
CPG_AABBCC
max 15 characters
LOCATION=
string
No location
max 15 characters
CONTACT=
string
No contact
max 15 characters
IP ASSIGN=
Arp, Fixed, DHCP
Fixed
IP ADDRESS=
ip-address
127.000.000
ddd.ddd.ddd format
NET MASK=
net-mask address
255.255.000
ddd.ddd.ddd format
DEF.GATEWAY=
default gateway address
000.000.000
ddd.ddd.ddd format
WORKGROUP=
string
P_NFFPS_TO
max 15 charactes
SMTP=
disabled, enabled
Disabled
MAIL SERV.ADD.=
mail server address
000.000.000
ddd.ddd.ddd format
SENDER ADDRESS=
string
No address
max 48 charactes
DESTIN.ADDRESS=
string
No address
max 48 charactes
}
Updating steps
1. Create a sub-directory and position on it.
2. Copy from the WEB the file SP40LANCFG.ZIP.
3. Exctract the file.
4. Connect the printer to a PC on the parallel port LPT1 or the serial one COM1.
5. Power-on the printer and put it in ready status.
Prompt on the P.C. following syntax:
C:>\ lanpar lanpar LPT1:
6. Print the Self test to assure the LAN configuration has been correctly loaded.
Содержание Compuprint SP 40
