manualshive.com logo in svg

CPG Compuprint SP 40, Руководство по обслуживанию

Поделиться
Скачать
CPG Compuprint SP 40 Скачать руководство пользователя страница 39

Maintenance Manual                                                                                                         

 SP 40

Rev. 005

29

Chapter 2

Removals

2.9

Ribbon Sensor Assy

DANGER

 :

To prevent serious personal injury from electrical shock always turn the printer off and unplug

the power cable before to remove the paper motor assy.

Ribbon sensor assy is item 99 of figure 2.12 and is fixed on the upper side of the right frame of the printer.

To Remove:

1) 

Remove the top and the main cover assy (see chapter 2.2).

2) 

Push the green levers to rise the upper side of the mechanical assy and remove the inked ribbon.

3) 

Unplug the connector cable from the engine board (the 2

nd

 starting from the right side).

4) 

Remove the metal cable retainer (item 92 of figure 2.12) from the rear side of the right frame.

5) 

Unscrew the screw (item 73 of figure 2.12) fixing thr sensor on the right frame.

6) 

Remove the ribbon sensor assy being careful to slip off  the connector cable through the vertical frame
toward the front side.

To Install:

To install, follow the removal step in reverse order.

Figure 2.12 - Ribbon Sensor Removal

Содержание Compuprint SP 40

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды