Maintenance Manual
SP 40
Rev. 005
14
Chapter 2
Removals
2.2
Covers
DANGER
:
To prevent serious personal injury from electrical shock always turn the printer off and unplug
the power cable before remove the cover parts.
ATTENTION
:
The electronic parts of this printer are easily damaged by Electronic Static Discharge(ESD).
Ensure that ESD protection devices and procedures, including the static discharge
wrist wrap, are used while working on this printer.
Do not remove the operator panel cable from the o.p board before unplug the AC
cable. The power supply is powered on / off through the P.S. switch lever on the front
left side of the printer.
2.2.1 Top Cover
Top cover is item 26 of figure in next page.
Flap is item 28 of figure 2.2 on next page.
To Remove:
1)
Open the top cover as showed in figure 2.1 .
2)
Unhook the flap paying attention to not damage its lateral pivots and remove it from the top cover.
3)
Disingage the top cover from the main cover acting on ingage pivot (item 1 of figure 2.2) with a gently
push force toward the internal side of the printer.
4)
Remove the top cover
To Install:
To install the top cover, follow the removal step in reverse order.
2.2.2 Main Cover
Main cover is item 25 of figure 2.2 on next page.
To Remove:
1)
Remove the top cover
2)
While acting with a gently force toward the internal side on the four plastic hook (item 2 of figure 2.2) of
the base, unhook the main cover from the base. The two hooks located in the rear part of the cover can
be accessed through the respective little holes present in the cover.
3)
Remove the main cover.
To
Install:
To install the main cover, follow the removal step in reverse order.
Содержание Compuprint SP 40
