manualshive.com logo in svg

CPG Compuprint SP 40, Руководство по обслуживанию

Поделиться
Скачать
CPG Compuprint SP 40 Скачать руководство пользователя страница 28

Maintenance Manual                                                                                                         

 SP 40

Rev. 005

18

Chapter 2

Removals

2.4 

Mechanical Assy

To Remove:

1) 

Remove the top and the main cover (see chapter 2.2).

2) 

Unplug the seven cables from the connector on the front side of the engine board.
From right to left, the connectors are op. panel, ribbon sensor, paper motor, home sensor, selector
motor, carriage motor.

3)

Unscrew the four screws (item 19 of figure 2.6) fixing the mechanical assy on the base.

4)

Acting from the front side, gently rise a little bit the mechanical assembly from the base and unplug the
two print head cables from the engine board located in the rear part of the board.

5) 

Remove the mechanical assy from the base.

To Install:

Follow the removal step in reverse order.

Remark:
Viasual check from the right side of the printer, the correct bend of the print head cable.
They must be bended in the rear part of the printer.

Figure 2.6 - Mechanical Assy Removal

Содержание Compuprint SP 40

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды