manualshive.com logo in svg

CPG Compuprint SP 40, Руководство по обслуживанию

Поделиться
Скачать
CPG Compuprint SP 40 Скачать руководство пользователя страница 38

Maintenance Manual                                                                                                         

 SP 40

Rev. 005

28

Chapter 2

Removals

2.8

Home Sensor Assy

DANGER

 :

To prevent serious personal injury from electrical shock always turn the printer off and unplug

the power cable before to remove the paper motor assy.

Home sensor assy is item 69 of figure 2.11 and is fixed on the vertical frame of the printer.

To Remove:

1) 

Remove the top and the main cover assy (see chapter 2.2).

2) 

Push the green levers to rise the upper side of the mechanical assy and remove the inked ribbon.

3) 

Unplug the connector cable from the engine board (the 5

th

 starting from the right side).

4) 

Cut the fastener loop-self lock which retain the home sensor cable on the mechanical assy and extract
it from the wiring routing clamp.

5) 

Unscrew the screw (item 13 of figure 2.11) fixing the sensor to the vertical frame.

6) 

Extract the home sensor assy from the front side of the printer.

To Install:

To install, follow the removal step in reverse order.

Figure 2.11 - Home Sensor Assy Removal

Содержание Compuprint SP 40

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды