manualshive.com logo in svg

CPG Compuprint SP 40, Руководство по обслуживанию

Поделиться
Скачать
CPG Compuprint SP 40 Скачать руководство пользователя страница 33

Maintenance Manual                                                                                                         

 SP 40

Rev. 005

23

Chapter 2

Removals

2.6

Operator Panel

DANGER

 :

To prevent serious personal injury from electrical shock always turn the printer off and unplug
the power cable before to remove the operator panel.

ATTENTION

: 

The electronic parts of this printer are easily damaged by Electronic Static Discharge(ESD).  

Ensure that ESD protection devices and procedures, including the static discharge

wrist wrap, are used while working on this printer.

Do not remove the operator panel cable from the o.p board before unplug the AC

cable.

To Remove:

1)

Open the top cover.

2)

Remove the two screws (item 8 of figure 2.8) fixing the operatot panel support on the right side frame
and on the bed.

3)

Unplug the O.P. cable (item 21 of figure 2.8) and remove the operator panel with its support.

4)

Remove the two screws fixing the operator panel with its support and remove it.

To Install:

To install, follow the removal step in reverse order.

Figure 2.8 -  Operator Panel Removal

Содержание Compuprint SP 40

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды