manualshive.com logo in svg

CPG Compuprint SP 40, Руководство по обслуживанию

Поделиться
Скачать
CPG Compuprint SP 40 Скачать руководство пользователя страница 11

Maintenance Manual                                                                                                          

SP 40

Rev. 005

1

Preface

Preface

Rev. AE (005)

September 2005

Rev. AD (004)

April 2005

Rev. AC (003)

May 2004

Rev. AB (002) 

January 2004

Rev. AA (001) 

June 2003

This Maintenance Manual focuses on the maintenance activities on the printer SP 40.

All defects originated by incorrect paper insertion, wrong menu setting or mistaken controls commands, are not
covered by this  document to avoid duplication of informations available on the USER  MANUAL forwarded to each
end user within printer package.

When the malfunction eludes all the solutions  proposed in the USER MANUAL  or deducible from it, a severe
failure within the printer hardware, firmware or mechanisms should  be suspected.
Then follow the troubleshooting sequence advised in this  manual together with defective part removal and
replacement.

The informations on this document are subject to change without notice.

All efforts have been made to ensure the accuracy of the contents of this manual.

Содержание Compuprint SP 40

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды