manualshive.com logo in svg

CPG Compuprint SP 40, Руководство по обслуживанию

Поделиться
Скачать
CPG Compuprint SP 40 Скачать руководство пользователя страница 56

Maintenance Manual                                                                                                         

 SP 40

Rev. 005

46

Chapter 2

Removals

2.19    Platen Assy

DANGER

 :

To prevent serious personal injury from electrical shock always turn the printer off and unplug
the power cable before to remove the platen assy.

Platen assy includes items 17, 18 and 94 of figure 2.22.

To Remove:

1) 

Remove the top and the main cover assy (see chapter 2.2).

2) 

Remove the inked ribbon cartridge.

3) 

Unplug the seven cable from the connector on the front side of the engine board.

4) 

Remove the four screws fixing the mechanical assy on the base.

5) 

Acting from the front side, gently rise the mechanical assy and unplug the print head cables from the
engine board.

6) 

Remove the mechanical assy.

7) 

Remove the two allen screws and related washers (item 19 and 20 of figure 2.22) securing the platen
assy to the left and the right frame.

8) 

Loose  the screws (item 6 and 4 of figure 2.22) in order to give a little clearance between lateral frames
and central part of the mechanical assy.

9) 

Extract the platen assy from the left and the right frame and remove it from the lower side of the
mechanical assy.

To Install:

To install, follow the removal step in reverse order.

REMARK:

An appropriate adjustment is required in order to have a correct parallelism and a correct gap between platen
and AGA wheel. Adjustment procedure is showed also in the chapter 8 in deeper way.
1) 

Loose the allen screws (item 19 of figure 2.22). Platen assy will slide in the lowest position.

2) 

Move the print head in the right most position.

3) 

Keeping the allen screwdriver in the screw on the right side, gently rise the platen until it touch the
AGA wheel.

4) 

Gently fix the allen screw. Just to fix the position.

5) 

Move the print head in the left most position.

6) 

Keeping the allen screwdriver inthe screw on the left side, gently rise the platen assy until it touche the
AGA wheel.

7) 

Gently fix the allen screw. Just to fix the position.

8) 

Move the print head in the right most position.

9) 

Gently loose the allen screw  on the right side. Keeping the allen screwdriver on the screw, fix it as
soon as the contact position between AGA wheel and platen assy (without any other force) has been
found.

10) 

Move the print head in the left most position.

11) 

Gently loose the allen screw on the left side. Keeping the allen screwdriver on the screw, fixit as soon
as the contact position between AGA wheel and platen assy (without any other force) has been found.

REMARK:

Due to te fact that the platen assy is movable on its supports (there are two springs which maintained the
platen in its correct position) check for the correct platen free movement (down by pressure and up by springs
release) by force it both in right an left side.
The internal guides of the platen must be  lubricate with Molykote PG30L grease as indicated in chapter 4.4.

Содержание Compuprint SP 40

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды