manualshive.com logo in svg

CPG Compuprint SP 40, Руководство по обслуживанию

Поделиться
Скачать
CPG Compuprint SP 40 Скачать руководство пользователя страница 83

Maintenance Manual                                                                                                          

SP 40

Rev. 005

73

Chapter 3

Operabilty and Configuration

3.5.4  How to download to SP40 an existing configuration file

A configuration file, generated with the SP40 setup tool as previously described, can be simply used to duplicate the
same configuration on more printers.

SP40 unit has to be powered on in normal mode, connected to the PC through any active interface (Centronics or
Serial port).

Type:     

copy wnvm.dmp lpt1: /b

    

command from a DOS shell,

where 

wnvm.dmp

 

is the configuration file name.

The printer receives the file, checks for valid configuration format and in such a case the received content is recorded
into the non volatile memory.
After that the printer restarts the execution and downloaded configuration becomes the active.

Warning :

Configuration files generated by 

SP40setup

 tool are allowed to be used only on printers having te same firmware

version of  the unit used to generate the file!
In any other case the received file is discarded by the printer without any change on NVM!

Содержание Compuprint SP 40

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды