Coyote Point Systems E350GX, Руководство по установке и администрированию

Страница: 66 / 344

Chapter 4: Equalizer Network Configuration
66 Equalizer Installation and Administration Guide
To see the detailed configuration for a VLAN, click on the
Modify
icon on that row. See the section “Modifying a
VLAN” on page 68 for a description of the information displayed.
Configuring VLANs Using the VLAN Wizard
A VLAN Wizard is provided to simplify initial VLAN configuration for basic configurations of at most a single
management port and two VLANs for clusters and servers, as explained in Step 3 of the procedure below.
More complex VLAN configurations cannot be setup using the wizard; instead, use the VLAN Configuration tab as
explained in the following section, “Adding a VLAN Using the Add VLAN Command” on page 67.
To use the wizard:
1. Log into the Administrative Interface using a login that has
write
access for global parameters (see “Logging
In” on page 52).
2. Select Equalizer’s system name in the left frame and open the
Networking > VLAN Configuration
tab in the
right frame.
3. Click on the
VLAN Wizard
link, and choose the desired options for
Separate Default VLAN?
(
yes
/
no
) and for
Select VLAN mode
(
single
/
dual
/
advanced
). The various option combinations create the following VLANs:
•
no, single:
A single untagged VLAN where Equalizer, all clusters, and all servers reside on the same
network segment. All ports will be assigned to this VLAN.
•
yes, single:
2 untagged VLANs: one for Equalizer (with port 1 assigned) and one for all clusters and
servers (with the remaining ports assigned).
•
no, dual:
2 untagged VLANs: one VLAN for the Equalizer and all clusters (with ports 1 and 2 assigned),
and one VLAN for servers (with the remaining ports assigned).
•
yes, dual:
3 untagged VLANs are configured, one for Equalizer management (with port 1 assigned), one
for clusters (with port 2 assigned), and one for servers (with the remaining ports assigned).
•
no / yes, advanced:
choosing
advanced
for
Select VLAN mode
closes the wizard and opens the
VLAN
Configuration
tab so you can create a more complex VLAN topology.
Select the VLAN options desired and click the next icon ( > ) to continue.
4. Do one of the following:
• If you selected
no, single
in the previous step, click
commit
to use the Default VLAN for all clusters,
servers, and Equalizer management.
• If you selected any of these options in the previous step:
• yes, single
• no, dual
• yes, dual
Type in the
VID
and
VLAN IP
for the VLANs to be created in addition to the Default VLAN. Click
commit
to save your settings.
• If you selected
advanced
in the previous step, the wizard is closed and the
VLAN Configuration
tab is
opened. Use the procedures in the following sections to add, modify, and delete VLANs.
Untagged Ports
The port numbers of the Untagged ports assigned to this VLAN. Untagged
ports can be assigned to exactly one VLAN.