Coyote Point Systems E350GX, Руководство по установке и администрированию

Страница: 44 / 344

Chapter 2: Installing and Configuring Equalizer Hardware
44 Equalizer Installation and Administration Guide
e. In the
IP address
and
Netmask
fields, respectively, specify the IP address and netmask for the Default
VLAN.
f. When you’re finished, highlight
OK
and press
Enter
.
2. In the
Equalizer Configuration Menu
window, select option 6,
Commit
; then press
Enter
. The system commits
your changes and automatically reboots.
After rebooting, you can continue to configure Equalizer as described in the remainder of this chapter, and test your
initial setup as shown in the section “Testing Basic Connectivity” on page 49.
Setting the Time Zone
The time zone can be set using the browser-based Administration Interface, which also supports setting up a
Network Time protocol (NTP) server, as shown in “Managing System Time and NTP” on page 103. To set the
system time zone using
eqadmin
, follow these steps:
1. In the
Equalizer Configuration Menu
window, select option 2,
Time Zone
, and press
Enter
.
2. Use the menus to specify your time zone.
3. Highlight
OK; then
press
Enter
.
Setting the Date and Time
The current date and time can be set using the browser-based Administration Interface, which also supports setting
up a Network Time protocol (NTP) server, as shown in “Managing System Time and NTP” on page 103. To set the
system date and time using
eqadmin
, follow these steps:
1. In the
Equalizer Configuration Menu
window, select option 3,
Time
; then press
Enter
.
2. Specify the current date and time, based on a 24-hour clock, in the format MM/DD/YY HH:MM.
3. Highlight
OK; then
press
Enter
.
Adding Administrative Interface Logins
The browser-based Administrative Interface by default supports two logins:
touch
and
look
. The
touch
login has
control access over Equalizer’s configuration, while the
look
login has read access only to the interface. Additional
logins can be created with custom permissions on clusters and global configuration. See “Managing Multiple
Interface Users” on page 56 for a description of the user management interface.
Option
4 Manage users
allows you to create a full access or read only user login for the Administrative Interface in
the event you cannot log in, either because all logins have been accidentally deleted or all administrative passwords
lost. To add a user login, do the following:
1. In the
Equalizer Configuration Menu
window, select option 4,
Manage users
, and press
Enter
.
2. Select either
Full access login
or
Read-only login
.
3. Type in a name for the new login. Then, type the password. The password can include any combination of
printable characters (except spaces) and can be no more than 20 characters in length ( note that spaces are
accepted by the interface, but will not work when attempting to log in ).
4. Select
OK
to create the login and return to the main menu.