Coyote Point Systems E350GX, Руководство по установке и администрированию

Страница: 151 / 344

Managing Servers
Equalizer Installation and Administration Guide 151
1. Log into the Administrative Interface using a login that has
add/del
access for the cluster that contains the
server (see “Logging In” on page 52).
2. If necessary, shut the server down gracefully before taking it out of service, as shown in the section “Shutting
Down a Server Gracefully” on page 149. This is particularly important if the server is in a Layer 4 cluster and
may have active connections; see Step 4.
3. In the left frame, right-click the name of the server to be removed and select the
Delete Server
command from
the menu.
4. When prompted, click
delete
to confirm that you want to remove the server from the cluster. Clicking
delete
removes the server from the configuration immediately. To cancel the deletion, click
cancel
. If you attempt to
delete a server that has active connections:
• If the server is being deleted from a Layer 4 cluster, clicking delete removes the server from the
configuration and immediately terminates all active connections for that cluster IP and server.
• If the server is being deleted from a Layer 7 cluster, clicking delete removes the server from the
configuration, but does not terminate any active connections. Active connections for that cluster IP and
server will remain open until they are completed or reach the appropriate timeout.