Coyote Point Systems E350GX, Руководство по установке и администрированию

Страница: 250 / 344

Chapter 9: Administering GeoClusters
246 Equalizer Installation and Administration Guide
3. The following dialog appears:
4. Enter the following information:
5. Click the
commit
button to add the GeoCluster. An entry for the new GeoCluster appears in the left frame. The
right frame displays the GeoCluster Configuration screen.
6. Continue with Step 3 in the next section to change the default GeoCluster parameters.
Viewing and Modifying GeoCluster Parameters
To view or modify a GeoCluster’s load-balancing options, follow these steps:
1. Log into the Administrative Interface using a login that has
read
(to view only) or
write
(to view or change)
permission on the GeoCluster (see “Logging In” on page 52).
2. Do one of the following:
• Click on the GeoCluster name.
• Click
Envoy
in the left frame and then click the Modify icon in the GeoCluster Summary table
row for the GeoCluster you want to modify.
FQDN name
Enter the GeoCluster name , which is the fully-qualified domain name
(FQDN) of the GeoCluster (for example,
www.coyotepoint.com
). The
FQDN must include all name components up to the top level (com, net,
org, etc). Do not include the trailing period.
DNS
ttl
The cache time-to-live, which is the length of time (in seconds) that the
client’s DNS server should cache the resolved IP address. Longer times
will result in increased failover times in the event of a site failure, but
are more efficient in terms of network resources. The default is 120
(that is, 2 minutes).