COSMOGAS AGUAPLUS 100, Инструкция по установке, эксплуатации и обслуживанию

Страница: 48 / 80

48
COSMOGAS AGUAPLUS
14 - USE
14.8 - “User menu”
Pressing the RESET key for 2 seconds accesses the “user
menu”. Display “M” in figure 14-1 begins to show parameter
1001
to tell the user that the mode has changed.
Using the
q
and
p
keys, you can scroll through the
parameters in the menu.
To exit the menu, simply press the RESET key again for 2
seconds.
If no keys are pressed for more than 60 seconds, it
automatically exits the menu.
For models from 100 to 140, all the parameters indicated as
“Burner 1” refer to the appliance Master Burner. To display the
same parameters for the other burners, you must connect the
display to the burner in question as described in section 15.8.
The following parameters can be accessed in this menu:
Parameter Parameter description U.M.
1001 Burner 1 - Water supply temperature °C
1002 Hot water storage tank temperature (N/A) °C
1004 External temperature (N/A) °C
1006 Burner 1 - Flue gas temperature °C
1007 Burner 1 - Return temperature °C
1008 Burner 1 - Ionisation current uA
1009 Burner 1 - Main circuit pump and motorised valve status ON/OFF
1010 Heating circuit pump status (N/A) ON/OFF
1011 Domestic hot water circuit pump status (N/A) ON/OFF
1012 Calculated heating setpoint (N/A) °C
1040 Burner 1 - Current fan rotation speed rpm
1041 Burner 1 - Fan rotation speed at ignition rpm
1042 Burner 1 - Fan rotation speed at minimum output heat rpm
1043 Burner 1 - Fan rotation speed at maximum output heat rpm
1051 Burner 1 - Last recorded lock-up (Loc) (see section 14.10.1) ** /
1052 Burner 1 - Last recorded error (Err) (see section 14.10.2) ** /
1053 Burner 1 - Number of times the burner lost its flame no.
1055 Burner 1 - Number of failed burner ignitions no.
1056 Burner 1 - Number of hours worked h x 10
1057 Burner 1 - Number of hours worked in domestic water with hot water storage tank h x 10
1059
* interval of time between the last two
lockouts (Loc)
1
value in minutes;
2
value in hours;
3
value in days;
4
value in weeks;
1060
* interval of time between the last two
errors (Err)
1062 Burner 1 - Water flow rate l/min
1101 Multi-burner: Number of burners on no.
1102 Multi-burner: Manifold temperature °C
1103 Multi-burner: Number of burners locked (Loc) no.
1104 Multi-burner: Number of burners in Error (Err) no.
1106 Multi-burner: Appliance in emergency Yes/No
1107
Multi-burner: Calculated heating setpoint
(only for 100, 115 and 140 models) (see Parameter 1012 for the other models)
°C
1120 Multi-burner: Burner 1 modulation level %
1121 Multi-burner: Burner 2 modulation level %
1122 Multi-burner: Burner 3 modulation level (N/A) %
1123 Multi-burner: Burner 4 modulation level (N/A) %
*
How to read the values of parameters 1059 and 1060:
e.g.: If it shows 1:29, it means 29 minutes;
e.g.: If it shows 2:12, it means 12 hours;
e.g.: If it shows 3:15, it means 15 days;
e.g.: If it shows 4:26, it means 26 weeks.
**
When the number 255 is displayed, it means there was no
lock-up or error.
N/A : Not Applicable.