COSMOGAS AGUAPLUS 100, Инструкция по установке, эксплуатации и обслуживанию

Страница: 74 / 80

74
COSMOGAS AGUAPLUS
17 - FORCED MENU
Parameters
Ref. Parameter description Adjustment range D e f a u l t
value
Individual
burner
(mod. 60
and 70)
Burner 1
(Master)
(mod. 100,
115 and
140)
Burner 2
(mod. 100,
115 and
140)
Customised
values
3001 Burner operation address 0 = Not in cascade
1 = Burner 1 (Master),
2 to 4 = Burner from 2 to 4 (slave
burners)
2 1 1 2
3002 Fan adjustment range from 0 to 4
0
60 = 0
70 = 2
100 and 115 = 0
140 = 2
3003 Display unit of measurement C = °C and bar;
F = °F and PSI;
C C C C
3004 Water pressure switch 0 = Disabled; 1 = Enabled;
2 = N/A; 3 = N/A
1 1 1 0
3005 Burner flapper valve 0 = Disabled; 4 = Enabled;
8 = N/A; 12 = N/A
4 0 4 4
3006 Water flow rate sensor 0 = Disabled; 16 = N/A;
32 = N/A; 48 = Enabled
48 48 48 48
3007 Condensate level sensor EnAb = Enabled;
dISA = Disabled
Enab Enab Enab dISA
3008 Combustion gas sensor type SEnS = Sensor; StCH = Switch
SEnS SEnS SEnS SEnS
3009 External sensor type 10 = 10kohms; 12 = 12kohms;
10 10 10 10
3010 Other sensor type 10 = 10kohms; 12 = 12kohms;
10 10 10 10
3011 pump mode 0 = main c pump; 1 = N/A;
2 = N/A; 3 = N/A;
0 0 0 0
3012 domestic hot water operating mode 0 = only heating;
1= hot water storage tank;
2 = hot water tank with thermostat;
3 = N/A; 4 = N/A; 5 = N/A
0 0 0 0
3013 Reset Err 115 EnAb = Enabled;
dISA = Disabled
Enab Enab Enab Enab
3015 Climatic adjustment: heating supply maximum
temperature (this parameter is overwritten by
parameter 3017)
from 20°C to 90°C
82°C N/A N/A N/A
3016 Climatic adjustment: heating supply minimum
temperature
from 20°C to 90°C
20°C N/A N/A N/A
3017 Supply maximum temperature (this parameter
takes priority with respect to parameter 3015)
from 20°C to 90°C
60°C 60°C 60°C 60°C
3018 Minimum supply temperature from 20°C to 90°C
20°C 20°C 20°C 20°C
3020 Water flow rate sensor type 0 = N/A; 1 = DN8;
2 = DN 10; 3 = DN 15;
4 = DN 20; 5 = DN 25
4 4 4 4
3022 Minimum water pressure from 0 to 5 bar
1 1 1 1
3035 Minimum water flow rate from 0 to 100 l/min
45
60 = 40
70 = 45
100 e 115
= 40
140 = 45
100 e 115
= 40
140 = 45
3050 Slave burner number from 0 to 3
3 0 1 3
3085 Modbus address 0 to 126
1 1 1 1
3086 Number of Stopbits 1 or 2
1 1 1 1
3100 Material selection ABS; CPVC; PVC; SST; PP.
PVC PVC PVC PVC
3101 Nation Selection US, CA
US US US US
Switch
“S4”
Switch “S4” position (see fig 15-11 and 15-12) On or Off
On On On Off
N/A = Not Applicable