Description:
Manual L4 ES HP; L4 ES HP W
Document Number:
1004289
Created By:
MSHN
Revision Approval Date:
2019-06-28
Revision:
A
© Corroventa Avfuktning AB
14 (42)
Drying methods
The following outlines the basics of different drying methods that can be applied to L4 ES and, in some
cases, additional equipment from Corroventa's product range. The descriptions are only an overview,
and in the event of any doubt about how any given situation should be handled please consult an
experienced dehumidification technician.
General drying, room dehumidification
As with all dehumidification, regardless of type or model, it is important to ensure that the area to be
dehumidified is well sealed so that the process is performed as fast and as energy efficiently as possible.
Windows and doors to the area must be closed, and if there are not any, plastic or other temporary
partitions must be used.
If the extent of the damage is limited. it is advisable to cover it with plastic and let the dry air flow in
under the plastic via a hose. Leave openings at the edges where the air can exit. This makes the process
faster and consumes less energy
.
C
OVER LOCAL DAMAGE WITH PLASTIC WHEN DRYING TO INCREASE THE DRYING RATE AND
REDUCE ENERGY CONSUMPTION
.
