Description:
Manual L4 ES HP; L4 ES HP W
Document Number:
1004289
Created By:
MSHN
Revision Approval Date:
2019-06-28
Revision:
A
© Corroventa Avfuktning AB
2 (42)
User instructions L4 ES
Area of use
L4 ES is an adsorption dehumidifier with air-cooled condenser, developed and designed for construction
dehumidification and for drying water damage and is very practical for use in situations where it is
difficult to extract wet air from a normal adsorption dehumidifier.
Using the adsorption principle, L4 ES also works at low temperatures and by condensing in the air-
cooled condenser, the room is supplied with up to 400 W of extra heat.
Via the control panel, the user of L4 ES can optimise the operation for the intended job, set the capacity
and volume, control the fan as well as use integrated or external sensors for temperature and relative
humidity to achieve the desired effect in combination with the lowest possible energy consumption. L4
ES can also be used in networks and is prepared for remote monitoring and remote control.
Furthermore, it has a built-in pump, integrated hose and cable wind, as well as flexible support feet that
protect floor surfaces and at the same time allow stackability. Its robust design gives a long service life.
In addition to room drying, L4 ES can also be used together with turbines for drying layered
constructions, both suction and pressure drying.
Properties:
•
Energy efficient
•
Service-friendly
•
High capacity level
•
Digital interface with network function
•
Robust
•
Very quiet
•
Low weight
•
Energy and time meter – resettable work
counter
•
Easy to transport
•
Stackable
•
Ergonomic
•
Very compact
