Cornelius VIPER 2 FLAVOR, Руководство по обслуживанию

Страница: 42 / 85

Viper Service Manual
© 2008-2012, IMI Cornelius Inc. - 37 - Publication Number: 621260373SER
Filling a Barrel
NOTE: When FILL button is pressed, it changes to a STOP button.
Run the Barrel Motor
NOTE: When RUN button is pressed, it changes to a STOP button.
Rinsing a Barrel
When rinsing a barrel, the Barrel Maintenance menu cannot be used. The
procedure must be done manually, as described in Table 23.
Table 21
Step Action Procedure
1
Fill a barrel
From the Select menu (Figure 25), open the Barrel
Maintenance menu, shown in Figure 26.
2
Select the barrel
Use the Up and Down arrows to highlight the
desired barrel
3
Select Fill function
Press the FILL button at the bottom of the display
to fill the highlighted barrel
4
Finish filling the barrel
When the fill completes, intermittently open and
close the relief valve to bleed CO
2
from the barrel.
5
Complete the proce-
dure
Press the STOP button at the bottom of the display
to stop the fill. Press the BACK button to return to
the Select menu.
Table 22
Step Action Procedure
1
Run a barrel
From the Setup menu (Figure 25), open the Barrel
Maintenance menu, shown in Figure 26.
2
Select the barrel
Use the Up and Down arrows to highlight the
desired barrel
3
Select Run function
Press the SPIN button at the bottom of the display
to start the motor in the highlighted barrel
4
Stop the procedure
Press the STOP button at the bottom of the display
to stop the motor. Press the BACK button to return
to the Select menu.
Table 23
Step Action Procedure
1
Empty a barrel
If the barrel has liquid in it, use the Purge proce-
dure in Table 20 to empty the barrel.
2
Rinse a barrel Go to the Barrel Status menu (Figure 12).
3
Select the barrel
Use the Up and Down arrows to highlight the
desired barrel
4
Turn off the barrel
Press the OFF button at the bottom of the display
to turn off the barrel.