CONVEY-ALL CST-1550, Руководство оператора

Страница: 34 / 62

3-12 Revised 09.2020
Operator’s Manual: CST-1550
The wireless functions correspond to the
manual valve on the tender. The following are
explanations of each button and its function:
ON/OFF Button (Red):
Turns the wireless handset on and off.
ZERO Button:
Resets the scale, when no load applied.
GROSS Button:
- Press to view Gross weight for entire unit.
- Press again to show Net weight.
SETUP Button:
Refer to wireless handset’s manual for
handset default settings and functions.
NET Button:
- Press to view Gross weight for entire unit.
- Press again to show Net weight.
TARE Button:
Press to enter weight of empty tender.
LIGHTS Button:
Turns CST’s working lights on and off.
Extract Rear Conveyor - for work:
SWING Button:
Swing rear conveyor around 180° from
storage to “rotation centre”. It will point
directly back from the tender.
DROP Button:
Drop hopper of the rear conveyor fully.
It will sit below the height of the slave
conveyor discharge.
In the same function, the discharge will
rise to its limit. Hold down button until
both movements are complete.
SHUTTLE Button:
Shuttle rear conveyor frame until it’s
hopper is below the slave conveyor
discharge.
Once the rear conveyor is positioned below the
slave conveyor, the discharge can be swung,
raised and lowered for work. The rear conveyor
belt will now run.
BELT POWER Button:
Turns both belts on and off.
BELT SPEED Button:
There are three speeds, press button
a fourth time to return to the slowest
speed.
SELECT GATE Button:
Press to choose a compartment gate.
An LED on the back of the tender will
identify the open gate.
OPEN GATE Button:
Opens selected compartment gate.
CLOSE GATE Button:
Closes selected compartment gate.
Stow Rear Conveyor - for transport:
SHUTTLE Button:
Shuttle the rear conveyor frame back to
the passenger-side corner of tender.
LIFT HOPPER Button:
Lift the rear conveyor, to transport height.
In the same function, the discharge will
lower to horizontal. Hold down button
until both movements are complete.
SWING Button:
Swing the rear conveyor around until it is
lays long the side of the tender.
NET
GROSS
TARE
3.6 WIRELESS HANDSET FUNCTIONS
Fig 38 - Wireless handset, not to scale