CONVEY-ALL CST-1550, Руководство оператора

Страница: 43 / 62

Operator’s Manual: CST-1550
01.2019 4-1
3622000003
Section 4:
SERVICE AND MAINTENANCE
• Review the Operator’s Manual and all safety
items before working/maintaining.
• Place all controls in neutral, stop engine,
remove ignition key and wait for all moving
parts to stop before servicing, adjusting,
repairing or unplugging.
• Follow good shop practices:
- Keep service area clean and dry.
- Be sure electrical outlets and tools are
properly grounded.
- Use adequate light for the job at hand.
• Before applying pressure to the hydraulic
system, make sure all components are tight
and all hoses/coupling are in good condition.
• Always use personal protective equipment;
safety glasses, gloves, hearing protection,
when performing any service or maintenance.
• Relieve pressure from hydraulic circuits
before servicing or repairing.
• Keep hands, feet, hair and clothing away
from moving and/or rotating parts.
• Make sure there is plenty of ventilation. Never
operate the engine in a closed building. The
exhaust fumes may cause asphyxiation.
• A fire extinguisher and first aid kit should
be kept readily accessible while performing
maintenance on this equipment.
• Periodically tighten all bolts, nuts and screws
and check that all cotter pins are properly
installed to ensure unit is in a safe condition.
• Keep decals clean. Replace if damaged or
not clearly visible.
4.1 FLUIDS AND LUBRICANTS
Fuel & Engine Oil:
Refer to the engine operator’s manual, for
specific instructions.
The fuel tank capacity is 57 Litres (15 US Gal.)
Grease:
Use an SAE multipurpose high temperature
grease with extreme pressure (EP) performance.
Also acceptable, SAE multipurpose lithium
based grease.
Hydraulic Oil:
Use an ISO grade 36 hydraulic oil for all operating
conditions (Hydrex MV36 or comparable).
The Oil Reservoir capacity: 189 Litres (50 US Gal.)