CONVEY-ALL CST-1550, Руководство оператора

Страница: 16 / 62

2-8 Revised 09.2020
Operator’s Manual: CST-1550
2.10 MAINTENANCE SAFETY
• Review Section 4: Service and Maintenance,
before maintaining or operating the conveyor.
• Follow good shop practices:
- Keep service area clean and dry.
- Be sure electrical outlets and tools
are properly grounded.
- Use adequate light for the job.
• Place all controls in neutral or off. Stop engine,
and remove ignition key. Wait for all moving
parts to stop before servicing, adjusting, repairing.
• Relieve pressure from hydraulic
circuit before servicing.
• Before applying pressure to a
hydraulic system, make sure all
components are tight and that
hoses and couplings are in good
condition.
• Keep hands, feet, hair and clothing
away from all moving/rotating parts.
• Replace parts with genuine factory
replacement parts to restore your equipment
to original specifications.
Merdian Manufacturing Inc. will not be
responsible for injuries or damages caused by
use of unapproved parts and/or accessories.
• Make sure there is plenty of ventilation. Never
operate the engine in a closed building. The
exhaust fumes may cause asphyxiation.
• Clear the area of bystanders, especially
children, when carrying out any maintenance
and repairs or making any adjustments.
• Before resuming work, when maintenance
work is complete, install and secure all guards.
• Replace damaged or not clearly visible decals.
2.11 TIRE SAFETY
• Failure to follow procedure when
mounting a tire on a wheel or rim
can produce an explosion and may
result in serious injury or death.
• Do not attempt to mount a tire unless you have
proper equipment and training to do the job.
• Have a qualified tire dealer or repair service
perform required tire maintenance.
• When replacing worn tires, make sure they
meet the original tire specifications.
•
Never undersize.
• Reference the tire side wall for information on
the maximum cold tire pressure (PSI). Keep
the tires inflated to this specified amount.