CONVEY-ALL CST-1550, Руководство оператора

Страница: 47 / 62

Operator’s Manual: CST-1550
01.2019 4-5
Fig 63 - Rear conveyor movement points
4.2.3 Every 100 Hours or Monthly:
Note:
Recommended greasing is one small stroke
every month. Be careful not to over grease
as this may push the seal out.
11. Grease the slave conveyor roller bearings.
- Tail end
- Drive and discharge rollers
12. Oil couplers on hydraulic drives.
- At discharge of slave conveyor
- At discharge of rear conveyor
13. Grease the rear (incline) conveyor roller
bearings.
- Tail end
- Drive and discharge rollers
14. Grease rear conveyor movement points.
a. Grease shuttle point.
b. Grease swing points.
c. Grease conveyor raise cylinder points.
d. Grease conveyor drop cylinder points.
15. Grease the gate cylinder and bushings,
below each compartment.
16. Check the tension and alignment of the slave
and rear conveyors.
Refer to Sections 4.3.2 and 4.3.3
b
c
a
d