CONVEY-ALL CST-1550, Руководство оператора

Страница: 36 / 62

Operator’s Manual: CST-1550
3-14 01.2019
The rear conveyor must be stored and locked in
transport position whenever it is not in use.
To Extract the Rear Conveyor:
1. Unlatch the rear conveyor from it’s storage
bracket.
Note:
Be sure handset is fully charged.
2. Swing the conveyor around 180° from
storage to “rotation centre”, placing it
straight out the back of the tender.
- Green LED on rear of tender will light
indicating conveyor is swung to centre.
Note: Conveyor must be centred to operate
the following movements:
- Drop conveyor hopper.
- Shuttle conveyor frame sideways.
3. Drop hopper fully, to sit below slave discharge.
In the same function, the discharge will
rise to its limit. Hold down the button
until both movements are complete.
Note: To drop the hopper:
- Conveyor must be at rotation centre.
- Conveyor frame must be at passenger-
side corner.
4. Shuttle conveyor frame to centre, positioning
its hopper below the slave discharge.
Note: To shuttle sideways:
- Conveyor must be at rotation centre.
- Conveyor hopper must be dropped fully.
- Discharge must be raised completely.
5. The rear conveyor is now in working position.
It can be swung left to right, in a 114° arc.
The discharge can be raised (to a maximum
of 18’ 8”) or lowered into unloading position.
To Stow the Rear Conveyor:
6. Swing the conveyor back to “rotation centre”,
so it points directly back from the
tender. Green LED will light.
7. Raise the conveyor discharge to its limit.
8. Shuttle the conveyor frame back to the
passenger-side (right) corner.
Note: To shuttle:
- Conveyor must be at rotation centre.
- Conveyor hopper must be dropped
completely.
- Conveyor discharge must be raised fully.
9. Lift the conveyor hopper to storage height.
In the same function, the discharge
will lower. Hold down button until both
movements are complete.
- Conveyor will now be horizontal.
Note: To lift the hopper:
- Conveyor must be at rotation centre.
- Conveyor frame must be at passenger-
side corner.
10. Swing the conveyor back around to sit on
the storage bracket along the side of the
tender.
Note: To swing the conveyor for storage:
- Conveyor frame must be at the corner.
- Conveyor hopper must be lifted completely
(conveyor will be horizontal).
11. Use the latch on the storage bracket to lock
the conveyor in place.
3.8 REAR CONVEYOR OPERATION