CONVEY-ALL BTS-295, Руководство оператора, Страница: 39 / 59

Operator’s Manual: Bean Tender-Swing Conveyor (BTS)
Revised 02.2019 4-3
Fig 47 - Gas engine
4.2 SERVICING INTERVALS
The conveyor belt alignment is preset to run true
under a condition of no load. It is important to check
alignment and make adjustments, if required, during
the initial few minutes of loaded operation.
Check bearings for wear daily.
The following recommended servicing intervals
are based on normal operating conditions. Severe
or unusual conditions may require more frequent
lubrication and oil changes.
Schedules may vary depending on options and
engine model contained in the present unit.
IMPORTANT:
For engine servicing and maintenance,
refer to its manual for complete details.
4.2.1 Every 10 Hours or Daily:
1. Check fuel level.
2. Check engine oil level.
3. Clean air filter
4. Check oil level in the centrifugal clutch reservoir.
4.2.2 After 50 Hours or Weekly:
5. Grease conveyor’s hopper roller bearings, on
both sides.
Fig 48 - Centrifugal clutch
Fig 49 - Hopper roller bearing
Fig 50 - Discharge roller bearing
6. Grease discharge roller bearings, on both sides.