CONVEY-ALL BTS-295, Руководство оператора, Страница: 21 / 59

Operator’s Manual: Bean Tender-Swing Conveyor (BTS)
08.2015 3-3
Fig 6 - Gas engine
Fig 7 - Centrifugal clutch
a
c
g
b f
e
d
h
3.2 COMPONENTS AND CONTROLS
Before starting to work, all operators should
familiarize themselves with the location and function
of the controls.
Options and location may vary depending on model.
Gas Engine:
Read the engine manufacturer’s manual for more
detailed instructions.
a. Ignition Switch:
This switch controls the electrical power to the
engine electrical system.
b. Circuit Protector:
This protector monitors the engine electrical
circuit. Its LED will illuminate when the circuit
exceeds its preset value and trip the breaker.
Depress indicator to reset the breaker.
c. Choke:
This lever controls the position of the choke.
Always open the choke fully when operating the
machine.
d. Throttle:
This lever controls the engine RPM. Always run
at maximum engine RPM when operating the
conveyor.
e. Fuel Shut-Off Switch:
This switch controls the flow of fuel to the engine.
Move the switch to the right to open the valve
and start the flow of fuel. Move the switch left to
close the valve and the engine will run.
f. Starting Rope:
This retracting rope and T-bar is used to turn the
engine over for starting. Grasp the T-bar firmly
and pull the rope sharply to start the engine.
Close the choke if the engine is cold.
g. Choke Solenoid:
On units equipped with a full remote control, the
solenoid automatically chokes engine on ignition.
h. Centrifugal Clutch:
This clutch engages when the engine speed
exceeds 1400 RPM to drive the conveyor.
Increasing the engine speed will increase the
unloading rate.