CONVEY-ALL BTS-295, Руководство оператора, Страница: 24 / 59

Operator’s Manual: Bean Tender-Swing Conveyor (BTS)
3-6 08.2015
Fig 17 - Remote control receiver
Fig 16 - Remote control
Remote Control (Optional):
This remote control controls a majority of the
functions of the tender.
The remote control comes with a lanyard, equipped
with a safety quick release.
The remote control receiver is mounted on the right
side of the conveyor frame, beside the engine.
Refer to the remote control`s instruction manual for
more detailed instructions.
ON/OFF Button (Red):
Turns the remote control on and off.
ZERO Button:
Zeros the weigh scale reading, when no load applied.
GROSS Button:
Press to view Gross weight for the entire unit.
Refer to Remote Control`s manual for function.
SETUP Button:
Refer to Remote Control`s manual for Setup function.
NET Button:
Shows Net weight for the entire unit.
Refer to Remote Control`s manual for function.
TARE Button:
Press to enter TARE weight.
Refer to Remote Control`s manual for function.
IGNITION Button:
Press this button first when wanting to start engine.
ENGINE START Button:
Starts engine.
+
RPM
-
Buttons:
Adjusts the engine RPM.
GATE Buttons:
“Close 1” and “Open 1” operates gate number 1.
“Close 2” and “Open 2” operates gate number 2.
LEFT, RIGHT, CONVEYOR Buttons:
Pivots the conveyor side to side.
If the remote control cables are connected to pivot
motor, on the roller bracket correctly, the Left button
will pivot the conveyor to the left. If they are switched,
the conveyor will move to the opposite direction.
Fig 18 - Roll top cover