CONVEY-ALL BTS-295, Руководство оператора, Страница: 30 / 59

Operator’s Manual: Bean Tender-Swing Conveyor (BTS)
3-12 08.2015
Fig 35 - Transport lock
Fig 34 - Open roll top cover
Fig 36 - Pivot roller bracket
Fig 37 - Gas engine
3.6 FIELD OPERATION
The Convey-All™ Seed Tender is designed to handle
any kind of granular product, transport it and transfer
it to planters and drills as required. Inspect the
machine at the start of each day to be sure it is in
good mechanical condition.
1. Attach trailer to the tow vehicle. Always secure
the safety chains, and Break-Away Switch.
2. Review and follow the Pre-Operation Checklist.
Refer to Section 3.4
3. Open roll top cover.
NOTICE: Upending Hazard
Always load the front seed compartment first
to prevent the tender from upending.
4. Fill the compartments with product.
5. Close the roll top cover.
6. Be sure the conveyor is pointing forward on its
pivoting rollers.
7. Secure the transport lock between tender frame
and the conveyor’s roller bracket.
8. Transport to the working area.
9. Drive up to the planter or drill.
10. Shut off engine on tow vehicle, remove ignition
key, set park brake.
Keep the vehicle attached to the tender’s trailer
to provide counter balance.
11. Disconnect the transport lock.
12. Pivot the conveyor to position discharge spout
over the receiving equipment.
13. Engage the roller bracket pin to secure the
conveyor in position.
14. Start the tender’s engine.