XW-210 WiFi™ Users Manual
Header
Displays the text entered in the Module Description Text field on the
Control Page Setup
tab in the setup
pages. This is usually a description of the application such as “2nd Floor Freezer”.
Input
This row displays the current state of the digital input. The text in the left column (by default reads “Input
1”) is specified in the description field of the
Input
tab in the setup pages.
Counter
A cumulative count of OFF to ON states of the digital input. A reset button can be enabled which resets
the counter.
Relay
This row displays the current state of the internal relay and has buttons to allow the user to change the
relay state. The text in the left column (by default reads “Relay 1”) is specified in the description field of
the
Relay
tab in the setup pages. The state of the relay is shown to the right of the relay description text.
By default, the status text will read ON or OFF; however, the status text can be changed in the
Relay
tab.
To the right of the relay status, three buttons provide on/off and pulse control of the relay. The buttons
can be removed when not needed (in the
Control Page Setup
tab) and the text within the buttons can be
customized (in the
Relay
tab).
Sensor 1-4
These fields display the current temperature or other values measured by the associated sensors. Each
sensor has a description field specified in the Description field in the
Sensors
tab in the setup pages.
Registers
These rows display the current state of the four registers used in the BASIC script. The state of the
register is shown to the right of the description text. By default the status text will read
ON
or
OFF
when
the register is a value of 1 or 0 respectively. To the right of the register status, two buttons are provided to
control the state of the register. These buttons can be enabled or disabled in the
Control Page Setup
tab.
Xytronix Research & Design, Inc.
Page 55
Содержание WebRelay Wireless XW-210I
Страница 1: ......
