Web Server
XW-210 WiFi™ Users Manual
the relay is on.
Latch relay on when input [on, off, changes] (reset via web):
The relay latches on when
the input is [on, off, changes]
Latch relay off when input [on, off, changes] (reset via web):
The relay latches off when
the input is [on, off, changes]
Toggle relay when input [on, off, changes]:
The relay changes state when the input
is [on, off, changes]
Pulse relay when input [on, off, changes]:
The relay is pulsed when the input
is [on, off, changes]
If
1-Wire Sensor
is selected, choose the sensor number. For each sensor the following Action options are
available:
Set Relay On:
The relay turns on when [Alarm 1, Alarm 2, Alarm 1 or Alarm 2] is true
Set Relay Off:
The relay turns off when [Alarm 1, Alarm 2, Alarm 1 or Alarm 2] is true
Latch Relay On:
The relay latches on when [Alarm 1, Alarm 2, Alarm 1 or Alarm 2] is true
Latch Relay Off:
The relay latches off when [Alarm 1, Alarm 2, Alarm 1 or Alarm 2] is true
Toggle Relay:
The relay changes state when [Alarm 1, Alarm 2, Alarm 1 or Alarm 2] is true
Pulse Relay:
The relay is pulsed when [Alarm 1, Alarm 2, Alarm 1 or Alarm 2] is true
Email Alert:
Simple email messages can be sent in response to relay state changes. This parameter is used to
specify what relay state changes, if any, will cause email messages to be sent. Note that email
notification will work only if the email settings are correctly set up in the
Network
setup page. The
following options are available:
No Email Messages
:
No email notifications will be sent due to relay state changes.
Send Email when relay on
:
Email notifications will be sent when relay state changes to on.
Send Email when relay off
:
Email notifications will be sent when relay state changes to off.
Send Email when relay changes state
:
Email notifications will be sent when relay changes state
from off to on or on to off.
Use Email Address:
These check boxes determine what Email addresses the relay alert message is sent to. Up to eight
Email addresses can be assigned. The same message is sent to each Email address. For email
notification to work, the XW-210 must have a properly configured network connection and a SMTP
server must be defined. When an Email address is entered via the
WiFi Networks tab
, the check boxes
will show the respective Email addresses.
Remote Service:
When this box “Send State Message on Relay Change” is checked, State messages will be sent
Page 44
Xytronix Research & Design, Inc.
Содержание WebRelay Wireless XW-210I
Страница 1: ......
