53
EN
W415-1398 / C / 06.15.17
6.1 SAFETY SCREEN / DOOR REMOVAL AND INSTALLATION
WARNING
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
IF EQUIPPED WITH DOOR LATCHES THAT ARE PART OF A SAFETY RELIEF SYSTEM, THEY MUST
BE PROPERLY ENGAGED. DO NOT OPERATE THE APPLIANCE WITH LATCHES DISENGAGED.
FACING AND/OR FINISHING MATERIALS MUST NOT INTERFERE WITH AIR FLOW THROUGH AIR
OPENINGS, LOUVRE OPENINGS, OPERATION OF LOUVRES OR DOORS OR ACCESS FOR
SERVICE. OBSERVE ALL CLEARANCES WHEN APPLYING COMBUSTIBLE MATERIALS.
BEFORE DOOR IS REMOVED TURN THE APPLIANCE OFF AND WAIT UNTIL APPLIANCE IS COOL TO
THE TOUCH. DOORS ARE HEAVY AND FRAGILE SO HANDLE WITH CARE.
75.1A
A barrier designed to reduce the risk of burns from the hot viewing glass is provided for the
appliance and shall be installed..
Before the glass door can be removed, the safety screen must be removed. Lift the safety screen off the 4
pins, tilt the top forward and remove from the appliance.
Leave a hand on the glass door during entire door
removal. The glass door is secured to the firebox with
two spring latches along the top and two along the
bottom. Pull the handles of the latches forward, then lift
the latches out from the door frame to release the top of
the door. Repeat the same step for the two bottom
latches. Next, pivot the door forward until the top edge
clears the front of the appliance. Carefully grip the sides
of the door lifting it off the appliance.
NOTE: These
spring latches make up the spring relief system for
!
Содержание CB30NTR
