Maintenance
51
Removing scanner glass
Replacing the scanner glass
Remove scanner glass
Place an index finger under each end
of the glass then starting at one end
apply moderate upwards pressure to
begin separating it from the scanner
body
Lift each end of the glass no more
than 10mm / 0.5”.
SEE NEXT PAGE FOR FULL
INSTRUCTIONS.
WARNING:
DO NOT LIFT THE
GLASS FULLY OUT OF THE
SCANNER AT THIS POINT.
FAILURE TO OBSERVE THE
CORRECT SCANNER GLASS
REMOVAL METHOD MAY BREAK
THE GLASS.
WARNING
10mm / 0
.5”
10mm / 0.5”
41