Operating Instructions
750 W 27 V pickup
CQF 04/2 + Interface M12
BAL9100-0145a-EN
www.conductix.com
translated document
Page 8 of 40
2.2
Personnel requirements
2.2.1
Qualifications
WARNING!
Inadequately trained persons are at risk of injury!
Improper use can result in serious injury to persons and property.
→
All installation and disassembly work has to be carried out by qualified personnel (IEC 364
respectively ENELEC HD 384 or DIN VDE 0100 and IEC 664 or DIN VDE 0110 and national
safety rules).
The following qualifications are mentioned in this operating instructions for different areas of operation:
Adjustments
Design, adjustments and commissioning may only be carried out by trained specialist personnel from Conductix-Wampfler.
Trained personnel/operators
have been instructed in an instruction session by the operator with respect to the tasks assigned to them and the potential
dangers arising from improper actions.
Specialist personnel
consists of persons capable of performing assigned tasks and independently identifying and avoiding potential hazards based
on their specialist training, knowledge and experience as well as their understanding of the applicable regulations.
Only persons who can be expected to perform their work reliably are acceptable personnel. Persons whose responsiveness is
influenced by drugs, alcohol, or medications, for example, are not permitted.
When selecting personnel, all age- and occupation-specific regulations applicable at the place of use must be observed.
2.2.2
Unauthorized personnel
WARNING!
Danger due to unauthorized personnel!
Unauthorized persons who do not meet the requirements described here are not acquainted with
the dangers in the working area.
→
Keep unauthorized persons away from the working area.
→
In case of doubt, address the person and direct them away from the working area.
→
Stop working as long as unauthorized persons are in the working area.
