Operating Instructions
750 W 27 V pickup
CQF 04/2 + Interface M12
BAL9100-0145a-EN
www.conductix.com
translated document
Page 10 of 40
3
Intended use
The device is intended for operation in conjunction with other IPT
®
(Inductive Power Transfer) components intended for contactless
transmission of electrical energy. A pickup generates a DC voltage from an AC-generated magnetic field of an IPT
®
primary track.
The device is not suitable for stand-alone operation and must be used in conjunction with the appropriate IPT
®
components. The
device may only be used in conjunction with IPT
®
input components manufactured by Conductix-Wampfler GmbH.
Only qualified personnel may operate this equipment. Repairs must be made exclusively by Conductix-Wampfler employees.
WARNING!
Hazard due to improper use!
Any application that deviates from or goes beyond the intended use of the devices can result in
hazardous situations.
→
The device may only be used as intended.
→
Follow all information in these operating instructions strictly.
→
The following uses of the device are forbidden.
Non-intended use particularly includes the following:
→
Using the device with unapproved accessories not authorized by the Conductix-Wampfler.
→
Operation of the device by untrained personnel
→
Operation of the device outdoors.
→
Operation of the device in areas at risk for explosions
→
Operation of the device outside of the specifications
→
Operation of damaged components
→
Misuse of the device e.g. as a climbing aid
→
Use of the device without additional measures to charge batteries or other energy storage devices (The
device is
not
a charger and therefore has no corresponding sensors, protective measures and charging
algorithms!)
We do not accept any liability for damage arising from improper use. The operator bears sole liability for all damage that result from
improper use.
