Operating Instructions
750 W 27 V pickup
CQF 04/2 + Interface M12
BAL9100-0145a-EN
www.conductix.com
translated document
Page 16 of 40
4.5.3
Ground connections
DANGER!
Risk of electric shock!
Any electrical equipment on the vehicle must be at a common potential (e.g. the vehicle frame). All
ground connections must therefore be connected.
→
Make sure that the heat sink is also grounded in a corresponding manner.
→
Do not rely on the connecting cables alone, as the pickup will not be de-energized and without voltage
even without connecting cables, as long as the primary side of the IP
®
system is active.
4.5.4
ESD protection
DANGER!
Risk of electric shock!
Because IPT
®
is an isolated system, depending on the vehicle design, ambient conditions, etc., charges
can build up on the vehicle and be stored there.
→
Make sure to provide an appropriate solution to dissipate this energy above ground on the system side
(e.g. conductive floor coating and discharge brushes, conductive rollers or similar) to avoid building up
such energy in order to ensure protection against the effects of electrostatic discharge.
5
Scope of delivery
Cables and plugs are not part of the scope of delivery. Additional information can be found in chapter 14.
