Operating Instructions
750 W 27 V pickup
CQF 04/2 + Interface M12
BAL9100-0145a-EN
www.conductix.com
translated document
Page 12 of 40
4.2
Ambient conditions
Storage temperature
-25°C to +55°C
EN 60721 | Class 7K3
EN 60721 | Class 7K3
Transport temperature
-25°C to +70°C
EN 60068-2-1 | Class 7K3
EN 60068-2-2 | Class 7K3
Ambient temperature operation
+5°C to +40°C
IEC 60068-2-1; IEC 60068-2-2
Air temperature as measured in immediate vicinity of working device.
Please note that the heat loss of the pickup will raise the ambient temperature, especially in
enclosed mounting spaces.
Operation
For indoor operation only.
The use in explosion-prone areas or in areas where the pickup is exposed to harmful oils,
acids, vapors, dust, gases, radiation, humidity, etc. is explicitly forbidden.
Humidity
< 85%, non-condensing
EN 60068-2-78
Vibration
IEC 60068-2-64; IEC 60068-2-6; IEC 60068-2-27
EN 60721-3-7 | Class 7M1
Chemical resistance
For industrial use without special conditions.
Any specific influences of chemicals must be checked.
Protection
IP20 / IP54 (with plug connected)
EMC
The device is intended for use in industrial environments.
EN 55011 | Class A
EN 61000-6-2
EN 61000-6-4
Installation height
Up to 1000 m. Above this height, only a reduced output power is available.
Transport
EN 60721-3-2 | Class 2M2
EMF
< 6.25 µT
EN 50413:2008
