Operating Instructions (GB)
900 191 - V1.0
_________________________________________________________________________________
Page 34
10.5
Error messages
If the control system detects a fault during operation, the status is displayed through this symbol
in the
main display.
Press this symbol to open the “error message” menu.
The following functions can be executed there and the following information is available:
Further functions on the topic of faults and alarms are described in Chapter 11.3 and 11.4.
Symbol / chart
Explanation
Alarm sound off:
The internal alarm tone is switched off by pressing the
button with this symbol. Previously selected alarm relays are also reset.
Faults are not acknowledged.
Acknowledge alarm/fault:
By pressing the key with this symbol, faults
are manually acknowledged as soon as the fault is rectified or no longer
pending.
Error messages:
In case of a fault, all currently present faults are
displayed in the display field “Error messages”.
Further information on the individual faults/malfunctions is provided in the
table “Fault list” in Chapter 16.0.
Alarms:
Pressing the field with this symbol opens the fault list. This menu
displays the fifty most recently faults. No entries can be made in this
menu.
Error messages
RCCB switch
High water
Overvoltage protection
…….
…….
…….
