Operating Instructions (GB)
900 191 - V1.0
_________________________________________________________________________________
Page 31
10.3
Infeed
Symbol
Designation
Explanation
Infeed operating data
The operating data for the infeed function can be
read off in this menu item.
General settings
Infeed
Further settings for the infeed function can be
adjusted in this menu item.
10.3.1
Infeed function operating data
Function
Explanation
Operating hours
The current operating hours of the infeed function are displayed here.
If needed, the counter can be reset by pressing the
key in the
expanded menu.
Switching cycles
The current switching cycles of the infeed function are displayed here.
If needed, the counter can be reset by pressing the
key in the
expanded menu.
Maintenance due
Disabled
A maintenance notification is issued
Enabled
After activation, the operating hours for the water infeed
can be entered here. If these are exceeded, a
maintenance message appears in the main display and a
corresponding interval sound is emitted.
The interval sound can be interrupted for 24 hours by pressing the
button.
The maintenance interval is reset by means of a service deployment in conjunction with entering the new
accumulated hours.
Further functions are described in Chapter 10.6.
Runtime
Seconds
Shows the last runtime of the water infeed.
Idle time
Seconds
Shows the last idle time of the water infeed.
Quick start
Seconds
Shows the time for the last quick start of the water infeed.
The above times are used to determine the data for the infeed function.
