Operating Instructions (GB)
900 191 - V1.0
_________________________________________________________________________________
Page 16
7.5
Main menu – Symbols
A detailed explanation and settings are shown in Chapter 11.
Setup:
Settings that are rarely changed are configured in the setup menu
during commissioning.
e.g.: language, time and various optional special functions.
Servicing:
This menu is used to set maintenance dates based on
operating hours or by date. Also located here is the fault list, information
on operating hours or switching cycles.
Alarms:
This menu is used to configure the alarm relays and their
functioning. It is also possible to change alarm sounds and fault settings.
GSM modem*:
If the control system is supplemented with an optional
GSM module, all relevant settings for operating the modem can be made
here.
*Detailed explanations are provided in the separate operating instructions
for the GSM modem!
Network module:
Admin:
Factory menu. No settings possible!
USB:
This symbol appears if a USB stick is plugged into the USB host
port during operation of the control system.
Data can now be written to or read from the stick via this menu.
Back:
Press this symbol to exit the menu and return to the main menu or
main display.
