Operating Instructions (GB)
900 191 - V1.0
_________________________________________________________________________________
Page 15
Infeed symbol:
The “Infeed” submenu opens when the symbol on the
display is pressed. One of the functions available here is manual mode.
Pump-out symbol:
The “Pump-out” submenu opens when the symbol on
the display is pressed. One of the functions available here is manual
mode.
Fill level display:
The fill level in the pump shaft is graphically displayed
as a bar graph here. The value next to the pump shaft shows the current
fill level and the set setpoint.
Press the shaft symbol to access the level monitoring submenu.
See Chapter 10.4 for more details
Current fill level in the pump shaft
Normal operation setpoint
Chapter 10.4
Summer mode setpoint
Chapter 12.0
Winter operation setpoint
Chapter 12.0
Adjusting the setpoint water level:
The setpoint value for the water
level can be adjusted up or down using the two arrow keys next to the
level indicator.
The value can be limited via the min. and max. water level setting.
Changes in the target level are made after 15 sec. accepted and
saved.
The currently active setpoint value is shown in bold.
See Chapters 10.4 and 12.0 for more details
Summer/winter
operation
Normal operation
Alarm sound OFF:
If this symbol is displayed, the alarm sound can be
switched off by pressing the symbol. Previously selected alarm relays are
also reset. Faults are not acknowledged.
Fault symbol:
This fault symbol appears if a fault is present in the area of
the control or measuring system.