Operating Instructions (GB)
900 191 - V1.0
_________________________________________________________________________________
Page 47
16.
Technical data
Operating voltage
3x230V / (400V) AC 50-60 Hz
Power consumption of control system (without power unit)
max. 25 VA; type 6.5 VA
Control fuse
Miniature fuse 5 x 20 mm 3.15AT (EN 60127-2/III)
Level sensor entry
4...20 mA (two-wire)
Level sensor supply voltage
Type. 24V=
Measuring accuracy at level sensor entry
±
1% v.E.
±
1 cm Wc per 100 cm Wc
Measurement range level sensor input
Adjustable between 0…4000 mm Wc, 0…400 cm Wc
Display resolution for Level sensors
1mm / 1cm
Short circuit current signal input 1, 2, HW
< 1,5mA
Switching voltage signal input 1, 2, HW
Type. 24V=
Short circuit current analogue input
< 25mA
Switching voltage analogue input
24 V=
Required ext. fuse protection for potential-free alarm relay
max. 8A / 250VAC
Maximum switching voltage for potential-free alarm relay
max. 250V AC / 30V DC
Switching voltage of potential free alarm relay
max. 8A (AC21A)
2x voltage output
230 V / 50 Hz / max. 1A
1x voltage output
24V= / max. 0.5A
Measuring accuracy of operating hours counter
<0.06% of the actual value
Drift of software clock
±
20ppm - 0,04ppm/°C
Temperature range short-term operation
0…55°C / 30% RH*
Temperature range continuous operation
(DIN EN 60204-1)
0…40°C / 50% RH*
Storage temperature range
-20 … 70°C
Humidity
(DIN EN 60204-1)
0…20°C / 90% RH (non-condensing)*
Protection class
min. IP54**
Lithium battery for clock's power reserve
Type CR2032 / 3V
* Harmful effects from occasional condensation and temperature changes must, if necessary, be avoided by suitable
additional measures (e.g. built-in heating devices, ventilation, air conditioning systems).
** Information on the degree of protection can be found on the nameplate of the control unit.
