Condair GC 130, Руководство по эксплуатации и обслуживанию

Страница: 38 / 72

38
Operator Interface Condair GS xxxxxxx_A_EN_1905_Condair-GS_OM
4.2.6.4 Administrator Menu
The Administrator menu lets you enable and disable password control, or install updates for the control
software. Refer to Figure 4 on page 32. Refer to
Table 6 on page 21
for the menu structure.
Each tab under the Administrator menu is discussed below.
Password Setting Tab
– Setpoint Password: allows you to enable or disable password
control to modify setpoint values when the humidifier is configured
to operate on internal RH(P) or RH(PI) control.
Options:
Yes
– requires password to modify setpoint values.
No
– requires no password to modify setpoint values.
Factory setting: Yes
– Main Menu Password: allows you to enable or disable password
control to access the Main menu.
Options:
Yes – requires password to access the Main menu.
No – requires no password to access the Main menu.
Factory setting:
Yes
Software Updates Tab
– Software Update: allows you to update the control software. A
warning message is displayed asking you to confirm the software
updating.
CAUTION! The control software will be corrupted if
updating is interrupted, which may render the humidifier
unusable.
Refer to "Installing Software Updates" on page 58 for detailed
instructions.
– Driver A/B Update: allows you to update the driver board firmware
for steam cylinder A/B