Condair GC 130, Руководство по эксплуатации и обслуживанию

Страница: 14 / 72

14
Product Overview Condair GS xxxxxxx_A_EN_1905_Condair-GS_OM
If Float Check is enabled during steam production, the control software will activate the drain sequence
every 24 hours (adjustable to any time of day) to verify proper functioning of the floats, dual fill valves,
and the drain pump.
14
10
11
12
8
9
13
15
26
1, 2
3
4
2, 5
6
7
7
16
18
19
20
21
22
23
24
25
17
GS 90-260 -CS GS 65-CS
Figure 4: General System Overview (full-size unit GS 65 shown)
1 Humidistat, On/Off (used for humidity
control)
2 Humidity sensor or modulating humidis-
tat (used for control of the space in the
return duct, high limit in the supply duct)
3 Duct, return air
4 Duct, supply air
5 Humidistat, On/Off, high limit (external
security loop)
6 Drain line, condensate (with trap)
7 Funnel, ar gap (with optional trap)
8 Supply line, gas
9 Nalve, manual gas shutoff
10 Fitting, union
11 Trap, sediment
12 Filter, water
13 Valve, water shutoff
14 Supply line, water
15 Fitting, union
16 Switch, disconnect, electrical fused
(dedicated)
17 Switch, disconnect, control signals
(dedicated)
18 Drain line
19 Drain line, exhaust condensate (CS
model only)
20 Steam line
21 Vent, air intake (connected to exterior
– optional)
22 Vent, exhaust vent (connected to
exterior)
23 Adapter, steam hose
24 Distributor, steam
25 Switch, air proving (external security
loop)
26 Double check valve backflow preventer
(supplied by others)