Condair GC 130, Руководство по эксплуатации и обслуживанию

Страница: 17 / 72

17
Operator Interface Condair GS
xxxxxxx_A_EN_1905_Condair-GS_OM
Table 4: Status Icon Descriptions
Icon Description
The icon appears to the left of the operating status message or the maintenance/fault message when
the system is working normally.
Warning
The icon appears to the left of the maintenance/fault status message when a maintenance reminder
or a condition with a "Warning" status is active. The humidifier will continue to produce steam when
there is a demand (unless the warning relates to a control signal).
A condition with a "Warning" status is active. Typically, these conditions are of a temporary nature,
or conditions that cannot cause damage to the system. Depending on the condition, the Condair GS
humidifier may be stopped or remains operable (unless the warning relates to a control signal). If the
cause of the condition clears on its own accord, the warning message is automatically reset. If the
condition becomes worse, a fault message may be triggered.
When a warning message is active, the status LED turns yellow in color.
Fault
The icon shown appears to the left of the maintenance/fault status message when a condition with a
"Fault" status is active. The humidifier stops producing steam.
A condition with a "Fault" status is active. Typically, these are conditions which prevent further opera -
tion of the humidifier, or conditions that can cause damage to the system. When a fault condition
occurs, the Condair GS humidifier stops steam production immediately.
When a fault message is active, the status LED turns red in color.
4.2.3 Maintenance and Fault Status
The Service/Warning/Fault status area of the Home screen (refer to Table 5 on page 17 ) shows mainte -
nance reminders, warning and fault status messages along with associated status icons. This field also
allows access to the "Service Menu" . When a maintenance reminder, warning or fault status message is
active, the list of current faults/warnings can be accessed directly from this field to view additional details.
The general maintenance reminders and alarm messages displayed in this area are described in
Table 5 ,
and the status icons are described in Table 4 . Refer to " "Warning and Fault List" on page 60 .
Table 5: Maintenance/Fault Status Descriptions
Message Description
Service info No faults conditions present.
Maint. Warning This maintenance reminder appears when the Service Interval time set in the control software
has elapsed. The unit can continue to operate for another 200 hours, after which a corre -
sponding fault message appears and the unit stops operating.
Perform the required scheduled maintenance, then reset the service reminder in the Service
menu. Refer to "Maintenance Procedures" on page 50 .
Warning A condition with a "Warning" status is active. Depending on the warning condition, the hu -
midifier will continue to produce steam when there is a demand (unless the warning relates
to a control signal).
In addition, the status LED turns yellow in colour.
Fault A condition with a "Fault" status is active. Depending on the fault condition, the humidifier will
not produce steam until the fault condition is cleared.
In addition, the status LED turns red in colour.
4.2.4 Help
Touch the <Help> button on the Home screen (refer to Figure 6 on page 16 ) to view your local technical
support help details.
4.2.5 System Information
Select the <About> button on the Home screen (refer to Figure 6 on page 16 ) to view the system informa -
tion for your Condair GS humidifier. The tab structure for this selection is shown below.