Condair Esco, Руководство по установке

Страница: 21 / 52

21
X
3. Mount collector pipe.
• Remove protective caps from the collector pipe.
• If the valve unit is already mounted: from the inside of the duct push the collector pipe into
the valve unit until it comes to a stop (the resistance of the O-ring inside the valve unit must
be overcome). The collector pipe is installed correctly, if the secondary condensate drain pipe
pokes X mm out of the duct (see illustration and table below).
Note: To improve gliding ability moisten the end of the collector pipe and the O-ring inside the
valve unit with water (do not use oil or grease!).
Esco 10 Esco 20 Esco 30
X
24 mm 50 mm 50 mm
Water