Comtech EF Data Radyne RCS20, Инструкция по установке и эксплуатации

Страница: 73 / 200

RCS20 M:N Redundancy Switch Revision 15
User Interfaces MN-RCS20 and CD-RCS20
4–41
2. Press <TIME> to cycle to the SET TIME Subscreen.
Key Label Function
S1 DATE Press to cycle to the SET DATE Subscreen.
S2 TIME Press to cycle to the SET TIME Subscreen.
S3 --- N/A
S4 NEXT Press to cycle to the next screen.
Numeric Keypad --- N/A
4.3.2.13 SET DATE
This subscreen allows the user to configure the real-time clock date for the RCS20.
4.3.2.13.1 Programming steps:
1. Press

or

to move the blinking cursor to the day, month, or year.
2. Press <UP> to increase the value of the day, month or year (at the location of the blinking
cursor), press <DOWN> to decrease the value of the day, month, or year (at the location of the
blinking cursor).
3. Press <CLR> to abort programming (no switch parameters changed).
4. Press <ENT> to load the information on the screen into the switch parameter table.
Key Label Function
S1

Press to move the blinking cursor to the left. Used to select Year, Month, and/or Day to
be changed.
S2

Press to move the blinking cursor to the right. Used to select Day, Month, and/or Year to
be changed.
S3 UP Press to increment the selected field.
S4 DOWN Press to decrement the selected field.
Numeric Keypad ---
Press <CLR> to abort changes and cycle back to the TIME / DATE CONFIGURATION
Screen.
Press <ENT> to accept the selected date.
SET DATE
DATE : 01 JAN 04
<--- ---> UP DOWN