Comtech EF Data Radyne RCS20, Инструкция по установке и эксплуатации

Страница: 173 / 200

RCS20 M:N Redundancy Switch Revision 15
Remote Operations MN-RCS20 and CD-RCS20
A–33
A.3.15 Opcode <2218h> Copy Modem Configuration
Command Data Field (2 bytes)
<1> From Modem 0 = Modem 0, 1 = Modem 1, 2 = Modem 2, 3 = Modem 3, 4 = Modem 4,
5 = Modem 5, 6 = Modem 6, 7 = Modem 7, 8 = Modem 8, 9 = Modem 9.
Modem configuration
must be learned.
<1> To Modem 0 = Backup 1, 1 = Modem 1, 2 = Modem 2, 3 = Modem 3, 4 = Modem 4,
5 = Modem 5, 6 = Modem 6, 7 = Modem 7, 8 = Modem 8, 9 = Modem 9,
10 = All Modems
The ‘From’ and ‘To’ modems must be present in the chassis and not equal to each other. You
can not copy a modem’s configuration onto itself. The Mod configuration will be copied and if
successful, the Demod configuration will be copied. If any errors occur, appropriate error
Opcodes will be returned.
A.3.16 Opcode <2219h>* Backup Test Modem Configuration
Command Data Field (1 byte)
<1> Modem Number 1 to 8 if channel 9 is configured as backup
1 to 9 if channel 9 is not configured as backup
A.3.17 Opcode <221Ah>* Backup Test All Modem’s Configurations
There is no data field for this command.
In order to backup test a modem configuration, a modem must be a prime modem that has
been assigned a backup. The prime modem’s configuration must be learned and its assigned
backup present in the chassis.
A.3.18 Opcode <2403h> Query RCS20 Device Identification
Query Response Data Field (1 Byte)
<1> Device Identification 24 decimal for RCS20