![Comtech EF Data Radyne RCS20 Скачать руководство пользователя страница 58](http://html1.mh-extra.com/html/comtech-ef-data/radyne-rcs20/radyne-rcs20_installation-and-operation-manual_2648530058.webp)
RCS20 M:N Redundancy Switch
Revision 15
User Interfaces
MN-RCS20 and CD-RCS20
4–26
4.3.1.20.1
Programming steps:
1.
Press
or
to move the blinking cursor the prime channel to be programmed.
2.
Use the numeric keypad to enter the demodulator fault delay for the selected prime channel.
3.
Select the desired demodulator fault delays for each prime channel (each demodulator may be
set to a different time delay if desired).
4.
Press <CLR> or <NEXT> to abort programming (no switch parameters changed).
5.
Press <ENT> to load the information on the screen into the switch parameter table.
Key
Label
Function
S1
Press to move the blinking cursor to the left. Used to select the demodulator (labeled
DMD1 through DMD9) to which the time delay is to be changed.
S2
Press to move the blinking cursor to the left. Used to select the demodulator (labeled
DMD1 through DMD9) to which the time delay is to be changed.
S3
---
N/A
S4
NEXT Press to cycle to the next screen.
Numeric Keypad ---
Used to enter the time delay for the selected demodulator.
Press <CLR> or <NEXT> to abort programming (no switch parameters changed).
Press <ENT> to load the information on the screen into the switch parameter table.
4.3.1.21
DEMOD AQU DELAY
This screen allows the user to set the length of time (in seconds) for each prime channel on the RCS20.
The fault delays for a demodulator are used to debounce the demodulator faults, thus if a demodulator
does not acquire, a timer is started and the failure will not be recognized by the RCS20 until the timer
reaches fault delay seconds. The fault delay can be from 0.0 seconds to 199.9 seconds for each of the
demodulators (each demodulator may be set to a different time delay if desired).
4.3.1.21.1
Programming steps:
1.
Press
or
to move the blinking cursor the prime channel to be programmed.
2.
Use the numeric keypad to enter the demodulator fault delay for the selected prime channel.
DEMOD FAULT DELAY (SECONDS) USE KEYPAD
DMD :DMD1 DMD2 DMD3 DMD4 DMD5
20.0 20.0 20.0 21.0 20.0
DMD6 DMD7 DMD8 DMD9
20.0 20.0 20.0 20.0
<--- ---> NEXT
Содержание Radyne RCS20
