Compsee Apex III, Техническое справочное руководство

Страница: 76 / 168

Apex PDT Technical Reference Manual 6 Utility Programs
COAM30002 Rev. 2.00 8/13/02
6-4
q
Each option is separated from others by white space (spaces
or tabs).
q
No white space is permitted between options and modifiers or
the separators (see below).
q The command line may be entered as often as desired in
order to modify the driver’s behavior after initial loading.
This feature can be used to add codes, delete codes, or change
any code’s modifiers.
Modifiers
Modifiers are implemented following the respective option. Not all
options have modifiers. Options are separated from modifiers by
either an equals sign (=) or a comma (,). Either separator may be
used interchangeably for best clarity.
All modifiers are entered as decimal integers.
Command Line Syntax
Example #1:
bcdriver all -dsym 3of9 UPCA
In Example #1, all options and modifiers are first reset to their
default values, all symbologies are next turned off, then decoding of
Code 3 of 9 (Code 39) and UPC-A is enabled.
Example #2:
bcdriver beep=250,1000 type=AIM AimTm=5
In Example #2, the good read beep duration and tone are first
changed, next the scanner type is changed to an internal laser with
aiming capabilities, and lastly the aiming dot duration is changed to
500 ms.